704-955-1778 info@aintingsbymecca.com

You may not think much about the differences between paints that are used inside the house and those that are used outside the house. However, the fact is, on the shelves of a paint store, you would find two categories of paints designed to be used as interior and exterior paints. As a layman, it’s really hard to tell the differences as they look and feel the same, but there must be differences because exterior paints have to withstand and resist the elements. This article tries to highlight the differences between interior and exterior painting to allow readers to choose the right paint depending on the part of their house to be painted.

Interior paintings

Interior paints don’t have to worry about the elements like sun, snow, and rain, in addition to the winds. This means that there are changes in additives, pigments, solvents, and resins that are the main ingredients of any paint. There’s no danger of fading due to extreme temperature conditions, and there’s no danger of powdery mildew because the interiors of a home don’t face the kind of moisture that the exteriors are exposed to.

Interior paints are washable ​​to clean smudges and marks that accidentally apply, especially by small children and pets in the home. Interior paints contain less pigment as they do not fade due to adverse weather conditions. Interior paints are made in such a way that small paint errors remain hidden, especially roller and brush marks. They are also easy to clean and stain-resistant. One feature that makes indoor paints different from outdoor paints is that they can be cured without any exposure to sunlight.

Exterior paints

Color retention is the biggest challenge with exterior paints as they must withstand adverse weather conditions. They must resist fading and must be flexible to withstand the flexion and contraction that is common in open conditions outside the home.

Most exterior paints contain a powdery mildew-resistant coating to prevent the formation of powdery mildew due to moisture in the air that comes in contact with the paint surface. Another thing that exterior paints have is the presence of many types of fungicides, pesticides, and mildew ides. Exterior paints make very good use of sunlight to cure quickly. After all, they have to face and endure the torture of extreme temperatures later on.

What is the difference between interior and exterior painting?

The first factor that we can point out as a differential concerning painting walls inside and outside a property concerns the need for greater protection between one area and another. For example, the outside of a house, such as a façade and a hallway, is exposed to temperature variations. In addition, there is another type of wear that the walls suffer as a result of rain.

Therefore, it is quite common for external walls, especially when the correct paint is not used, to fade quickly and lose color. That said, it’s clear that the outer part must be given some special care, isn’t it?

And the way you paint the outside walls of your home will make all the difference in the final result and over time. After all, it will be necessary to protect the wall from the sun, the formation of mold, humidity, etc.

With this increased attention to the external area, it is worth saying that the internal environment must also be taken into account, and with the maximum possible zeal so that the painting is perfect.

Preparing the walls before painting, applying a sealing product, and if necessary, spackle, repairing the plumbing due to leaks and humidity, among other factors, are essential for a successful painting job. Although interior and exterior paints look similar, their chemical properties are very different as the exterior paint protects itself to withstand adverse weather conditions.

  • Heat and snow can cause exteriors to expand and contract, requiring paint flexion. This is not required for interior paints.
  • Exterior paints must be resistant to fading as they face very high temperatures while there is no such problem for interior paints
  • Interior paints need to be smudge-resistant and good brushes and roller marks
  • Exterior Paints need sunlight to cure while interior paints are cured without direct exposure to sunlight
  • Although interior painting can be applied, hiring professional painters is essential for the proper application of exterior paints.
  • Exterior paints contain many additives such as pesticides and fungicides while not in interior paints
  • More resins are used in exterior paints, tie pigments to help paint your color

By hiring the right painting contractor in Saskatoon, you can ben sure that the right product will be used for the right job. Many people have trusted companies like Aaron Timoffee Painting because he is a red seal, journeyman certified painter with decades of experience.

Repainting at home is a simple and very fun way to renew your home. But despite this, our surveys show that about one in ten refrains from redoing at home, because they do not know where to start. So for those of you who love to renew and decorate with color but feel a little unsure of how to proceed, we have gathered all our tips in a practical checklist, with everything you need to know to get a really professional result!.

You need

  • A color jar with the color you have chosen
  • A roller and a trough
  • Brushes – one medium and one small (depending on the project)
  • A pipe stick to mix the paint with
  • Masking tape
  • Cloths or plastic sheets (to cover furniture and other objects)
  • Absorbent rags (for dusting walls and wiping up spills)
  • A stepladder (to reach difficult places)
  • Some rags (to take care of paint drops)

Follow these steps when and start painting!!

Choose color

The color of the walls makes a big difference to the overall look and feel of the room, so it is important that it is right. Once you have found the right color, the best tip is to buy a sample jar and sample paint at home to see that it is really right and looks good in the selected room.

Choose the right color

It is important to know what type of paint you are going to paint with, it depends on what room you are going to paint and what property the painted surface should have. So it’s not just the color you have to decide on before you paint your walls with a color that will hopefully last many years of a wonderful life in the home.

The hall, the kitchen, the children’s room, the living room or the bedroom – of course, we want equally nice walls in every room at home. But considering how much it can be smeared, gagged, painted, slabbed, and soaked in some rooms, it is actually not obvious that all color types fit equally well to all types of rooms.

Prepare and develop all tools

Bring out all tools and painting accessories so it is easily accessible. Cover for wall sockets, window frames, cornices, doors, and anything else you do not want to paint with masking tape. Remember to put the tape in a neat straight line so that the color edge is just as neat.

Cover and protect your furniture

It is usually a good idea to remove all furniture from the room, but if you do not have the space to do so, you can cover them with tarpaulins or plastic instead. Plastic carrier bags are a cheap and easy way to protect, for example, lamps.

You should always cover the surface under the area where you are painting, preferably with cardboard that you tape. Color drops tend to find their way to the floor no matter how careful you are, so it’s better to take the safe before the unsafe.

Dust off the walls

To get a completely even surface, it is very important that you dust the walls before you start painting. It is usually enough to wipe them once with a dry cloth. Be especially careful in the corners towards the roof where there may be cobwebs.

This is also a good opportunity to sand down any uneven stains and remove any old nails and screws in the walls. Fill the holes with putty if necessary.

Start painting

You do not normally need to use primer on walls that have already been painted (depending on the substrate and the existing color of the wall, so now it’s time to open the paint can.

Stir in the paint with your pipe stick and pour a little into the paint tray. Use a medium-sized brush to paint the outermost 10 centimeters of the wall, and paint over the edges of the masking tape. Use the roller to fill in the rest. The key to getting a smooth and even surface is not to have too much paint on the brush or roller.

Tip:  Wet the brush before you start painting, it prevents the paint from creeping upwards. Dip the brush about 1 cm into the paint and wipe one side against the edge of the paint can. This means that the paint does not drip from the brush as easily. It also helps you avoid applying too much paint and keeps the brush clean longer.

Let the first layer dry thoroughly and then add another if necessary.

Tip # 2:  Paint in V- or W-shaped strokes when using a roller, rather than up and down or from side to side. It gives a smooth surface without stripes.

Pull off the tape

Carefully pull off the masking tape when the paint is almost dry. If you wait until the paint has dried completely, you risk pulling off entire pieces of paint along with the tape. If this happens, you can always fill it in with a small brush.

Take a step back and admire your work

Clear! You should now have smooth, stylish walls with a perfectly smooth surface that is just waiting to form the backdrop to your “new” home.

 

In addition to higher performance, quality, and ease of use, premium paints have more durability and require less maintenance than standard paints.

The differences between premium and standard paints are not few: premium paints are ready to be used, can be applied without dilution, easily spread evenly, and have excellent coverage. They are a bit more expensive than the standard ones, but the advantages outweigh the price difference.

Main differences between premium and low-budget paints:

The comparison can be made in terms of:

  • Performance
  • Yield
  • Number of coats
  • Washability
  • Finishing
  • Weather resistance

Low-budget paint normally requires maintenance for about a year after being applied; in the case of the premium, cracks or need for repairs will only appear after ten years, depending on the brand.

Some paints even offer some types of warranty.

Dilution

When we talk about paints, a common practice in the market is dilution. Many times, people dilute paint in a greater amount of water than the product indicates, intending to increase performance. This exaggerated dilution causes premium paint to lose quality and the painter, his time.

Do it yourself

Premium paint is a trend in the do-it-yourself market. The goal is for people to be able to go to a store, buy it, and paint the house themselves. In this case, one of the issues that the manufacturers of the premium lines work the most is minimizing the spatter and dirt that these products cause. Premium paints use special supplies to avoid splashing so much, which facilitates their handling by a non-professional.

 Today, some products do not require dilution: just take the roller, dip it in the can or container to remove excess paint, and apply it directly to the wall.

 The main idea is to offer a better user experience.

The main characteristics of premium paints

Check out the aspects of premium paints that make them so advantageous:

  • Durability
  • Less number of hands
  • Resistance to temperature changes
  • Easier to clean
  • Does not flake
  • Color preserved
  • Does not blister
  • Low odor

If I intend to repaint a wall that is already painted white, and that will have a commercial use with a medium level of abrasion, such as an office, for example, I can adopt a Standard acrylic paint.

And to paint a plastered plaster ceiling, where I won’t need covering power because the PVA mass is white, and I won’t need abrasion resistance as it will be rare for someone to touch the ceiling? In this case, I can adopt the low-budget paint.

Now, what if I’m going to paint a place where the abrasion level will be high, and the previous surface wasn’t white, like a kindergarten for example? In this case, it is recommended to use premium paint, which will ensure better coverage with fewer coats and will resist frequent hand abrasion on the wall for longer.

In other words, the choice depends on the surface color and the level of abrasion it will suffer after painting. All it takes is a little analysis and common sense.

But can I use Premium paint to paint the ceiling? Yes, of course, you can, but you’re making an unnecessary investment in the paint’s abrasive resistance.

Can I use Economy paint to paint a large circulation store? Yes, you can too, but the economy won’t last. Before long, the paint will start to wear off and you’ll have to repaint the walls.

    Facebook Feed

    Our Video

    Our Gallery

Copyright © 2021 by www.paintingsbymecca.com - All rights reserved.